Benchmade 940-1 / 940-2 Blue Carbon Fiber Custom Scales
$117.50
Benchmade 940-1 / 940-2 Blue Carbon Fiber Custom Scales. This carbon fiber does have small vertical voids that don't effects performance of the scales, justed added character.
This Listing Is For The Scales Only, Knife is Not Included. These scales are designed for Benchmade 940-1 / 940-2 which have an open back and barrel spacers. These scales are Not a direct fit for the Aluminum scaled closed back Benchmade 940. They will work with the 940 if you procure the proper set of barrel spacers and appropriate length replacement screws.
Special Notes Please Read Before Purchase:
These scales are designed and tested to fit only authentic Benchmade and not clones or counterfeits. Please only order if you are sure about the authenticity of your benchmade as returns are not accepted.
Black and white photos are to illustrate contours of scales from many directions, but not the layering or pattern of the scales themselves.
Installation of the scales requires disassembly of your knife. Please don't purchase if you're not comfortable with your ability to complete this process. Videos can be found online to aid in the process.
A small amount of threadlocker should be present on each screw. Cleaning the screws and applying fresh removable threadlocker is recommended upon reassembly.
Carbon Fiber is produced by stacking multiple layers of Carbon Fiber, soaking in epoxy resin, and compressing the resulting material under heat until the epoxy cures, and as a result materials and the scales produced from Carbon Fiber can very slightly from set to set.
This Listing Is For The Scales Only, Knife is Not Included. These scales are designed for Benchmade 940-1 / 940-2 which have an open back and barrel spacers. These scales are Not a direct fit for the Aluminum scaled closed back Benchmade 940. They will work with the 940 if you procure the proper set of barrel spacers and appropriate length replacement screws.
Special Notes Please Read Before Purchase:
These scales are designed and tested to fit only authentic Benchmade and not clones or counterfeits. Please only order if you are sure about the authenticity of your benchmade as returns are not accepted.
Black and white photos are to illustrate contours of scales from many directions, but not the layering or pattern of the scales themselves.
Installation of the scales requires disassembly of your knife. Please don't purchase if you're not comfortable with your ability to complete this process. Videos can be found online to aid in the process.
A small amount of threadlocker should be present on each screw. Cleaning the screws and applying fresh removable threadlocker is recommended upon reassembly.
Carbon Fiber is produced by stacking multiple layers of Carbon Fiber, soaking in epoxy resin, and compressing the resulting material under heat until the epoxy cures, and as a result materials and the scales produced from Carbon Fiber can very slightly from set to set.
Benchmade 940-1 / 940-2 Blue Carbon Fiber Custom Scales. This carbon fiber does have small vertical voids that don't effects performance of the scales, justed added character.
This Listing Is For The Scales Only, Knife is Not Included. These scales are designed for Benchmade 940-1 / 940-2 which have an open back and barrel spacers. These scales are Not a direct fit for the Aluminum scaled closed back Benchmade 940. They will work with the 940 if you procure the proper set of barrel spacers and appropriate length replacement screws.
Special Notes Please Read Before Purchase:
These scales are designed and tested to fit only authentic Benchmade and not clones or counterfeits. Please only order if you are sure about the authenticity of your benchmade as returns are not accepted.
Black and white photos are to illustrate contours of scales from many directions, but not the layering or pattern of the scales themselves.
Installation of the scales requires disassembly of your knife. Please don't purchase if you're not comfortable with your ability to complete this process. Videos can be found online to aid in the process.
A small amount of threadlocker should be present on each screw. Cleaning the screws and applying fresh removable threadlocker is recommended upon reassembly.
Carbon Fiber is produced by stacking multiple layers of Carbon Fiber, soaking in epoxy resin, and compressing the resulting material under heat until the epoxy cures, and as a result materials and the scales produced from Carbon Fiber can very slightly from set to set.
This Listing Is For The Scales Only, Knife is Not Included. These scales are designed for Benchmade 940-1 / 940-2 which have an open back and barrel spacers. These scales are Not a direct fit for the Aluminum scaled closed back Benchmade 940. They will work with the 940 if you procure the proper set of barrel spacers and appropriate length replacement screws.
Special Notes Please Read Before Purchase:
These scales are designed and tested to fit only authentic Benchmade and not clones or counterfeits. Please only order if you are sure about the authenticity of your benchmade as returns are not accepted.
Black and white photos are to illustrate contours of scales from many directions, but not the layering or pattern of the scales themselves.
Installation of the scales requires disassembly of your knife. Please don't purchase if you're not comfortable with your ability to complete this process. Videos can be found online to aid in the process.
A small amount of threadlocker should be present on each screw. Cleaning the screws and applying fresh removable threadlocker is recommended upon reassembly.
Carbon Fiber is produced by stacking multiple layers of Carbon Fiber, soaking in epoxy resin, and compressing the resulting material under heat until the epoxy cures, and as a result materials and the scales produced from Carbon Fiber can very slightly from set to set.
Benchmade 940-1 / 940-2 Blue Carbon Fiber Custom Scales. This carbon fiber does have small vertical voids that don't effects performance of the scales, justed added character.
This Listing Is For The Scales Only, Knife is Not Included. These scales are designed for Benchmade 940-1 / 940-2 which have an open back and barrel spacers. These scales are Not a direct fit for the Aluminum scaled closed back Benchmade 940. They will work with the 940 if you procure the proper set of barrel spacers and appropriate length replacement screws.
Special Notes Please Read Before Purchase:
These scales are designed and tested to fit only authentic Benchmade and not clones or counterfeits. Please only order if you are sure about the authenticity of your benchmade as returns are not accepted.
Black and white photos are to illustrate contours of scales from many directions, but not the layering or pattern of the scales themselves.
Installation of the scales requires disassembly of your knife. Please don't purchase if you're not comfortable with your ability to complete this process. Videos can be found online to aid in the process.
A small amount of threadlocker should be present on each screw. Cleaning the screws and applying fresh removable threadlocker is recommended upon reassembly.
Carbon Fiber is produced by stacking multiple layers of Carbon Fiber, soaking in epoxy resin, and compressing the resulting material under heat until the epoxy cures, and as a result materials and the scales produced from Carbon Fiber can very slightly from set to set.
This Listing Is For The Scales Only, Knife is Not Included. These scales are designed for Benchmade 940-1 / 940-2 which have an open back and barrel spacers. These scales are Not a direct fit for the Aluminum scaled closed back Benchmade 940. They will work with the 940 if you procure the proper set of barrel spacers and appropriate length replacement screws.
Special Notes Please Read Before Purchase:
These scales are designed and tested to fit only authentic Benchmade and not clones or counterfeits. Please only order if you are sure about the authenticity of your benchmade as returns are not accepted.
Black and white photos are to illustrate contours of scales from many directions, but not the layering or pattern of the scales themselves.
Installation of the scales requires disassembly of your knife. Please don't purchase if you're not comfortable with your ability to complete this process. Videos can be found online to aid in the process.
A small amount of threadlocker should be present on each screw. Cleaning the screws and applying fresh removable threadlocker is recommended upon reassembly.
Carbon Fiber is produced by stacking multiple layers of Carbon Fiber, soaking in epoxy resin, and compressing the resulting material under heat until the epoxy cures, and as a result materials and the scales produced from Carbon Fiber can very slightly from set to set.